Your Best Choice for Furnace, Heat Pump, and AC Repair in Royal Oak, MI

I was called to inspect a leaking boiler pipe in a residential building. Upon arrival, I observed that the pipe was leaking from a joint. I carefully removed the old pipe and replaced it with a new one, ensuring a tight seal. I also checked the other joints in the pipe for any signs of wear or damage and made the necessary repairs. Finally, I tested the pipe to ensure it was functioning properly.

Installed two new Fujitsu evaporators and re vamped refrigerant lines

I was hired to perform maintenance on a residential air conditioning unit. I arrived at the customer's home and began by inspecting the unit to identify any issues. I checked the refrigerant levels, cleaned the condenser coils, and replaced the air filter. I also tested the unit's electrical components to ensure they were working properly. After completing the maintenance, I provided the customer with a detailed report of my findings and recommendations for future maintenance.

I was called to a job to service a make-up air unit. The unit was not working properly and was causing the building to have poor air quality. I diagnosed the issue and sent over a quote for the customer, we will be returning next week to complete it!

I was hired to seal a leak in a condensate pan. The condensate pan is a small container that collects condensation from the air conditioner. The leak was located in the pan's bottom, and it was causing water to drip onto the floor. To seal the leak, I first removed the old sealant from the pan's edges. I then cleaned the pan's surface and applied a new sealant. I used a caulk gun to apply the sealant and ensure that it was completely sealed. After sealing the leak, I tested the pan to ensure that it was working properly. I checked the sealant for any signs of cracking or leaking and made any necessary adjustments. Overall, sealing a condensate pan leak is a simple but important task that can help prevent water damage to your home. It's important to hire a professional to ensure that the sealant is applied correctly and to test the pan after the sealant has been applied to ensure that it is working properly.

Completed an AC Replacement in Royal Oak, MI.

Replaced air conditioning unit with a high efficiency Payne air conditioning system

AC Tune-Up in Royal Oak, MI.

Replaced a Unico Coil & Goodman Air Conditioner with a new Unico Coil & Daiken Air Conditioner Unit. Also added (4) 2” Supply Outlets to the system to help maintain temperature inside the home.

Today, we had a Daikin air-conditioner install, which was paired with a Unico high-pressure system. We added 4 new supply runs to increase airflow. everything turned out great. Another great job by the McCarver Mechanical crew

I recently completed a residential ac tune-up for a valued client. As a highly skilled and experienced home service professional, I thoroughly assessed the air conditioning unit to ensure it was operating efficiently. I cleaned and checked all components, including the condenser coil, evaporator coil, blower motor, and thermostat. I also replaced the air filter and lubricated moving parts to ensure optimal performance. By performing regular maintenance, I helped to improve the unit's energy efficiency and reduce the risk of breakdowns. The client was pleased with the results and expressed gratitude for my expertise and attention to detail.

I recently completed a job to maintain a minisplit heat pump. As an HVAC technician, my responsibilities included checking the electrical connections, cleaning the filters, and checking the refrigerant levels. I also visually inspected the heat exchanger and blower motor for any signs of wear or damage. Finally, I adjusted the airflow and refrigerant pressure to ensure optimal performance.

Ac maintenance

I recently completed a residential A/C tune-up on a Lennox unit for a customer in the San Francisco area. The first step in the process was to visually inspect the unit to ensure that it was in good working condition and to identify any potential issues. Next, I cleaned the condenser coil and the evaporator coil using specialized tools and cleaning solutions to remove any dirt, dust, or debris that may have accumulated on them. This helps to improve the unit's efficiency and reduce the risk of breakdowns. I also checked the refrigerant levels and charged the system if necessary to ensure that it was operating at the correct pressure. I tested the operation of all the electrical components, including the thermostat, fan motor, and compressor, to ensure that they were working correctly. Finally, I performed a combustion analysis to ensure that the unit was operating safely and efficiently. Overall, the residential A/C tune-up process is an important part of maintaining the unit's efficie

I recently completed a job as a highly skilled HVAC contractor performing a leak search on a residential A/C unit. The process involved thoroughly inspecting the unit for any signs of leakage or refrigerant loss. I started by disconnecting the unit from the power source and checking the pressure relief valve to ensure it was functioning correctly. Next, I used specialized leak detection equipment to detect any refrigerant gas leaks in the system. This equipment included a refrigerant gas detector and a leak detection vacuum pump. I carefully examined all components of the unit, including the compressor, condenser, evaporator, and refrigerant lines, for any signs of damage or wear that could cause a leak. I also visually inspected the unit for any signs of moisture or corrosion, which can indicate a refrigerant leak. After completing a thorough inspection, I identified the location of the leak and took the necessary steps to repair it. This may involve sealing any cracks or gaps in the

New booster fan installation on Washington St. in Royal Oak

New booster fans installed