Your Best Choice for Furnace, Heat Pump, and AC Repair in Clinton Township, MI

I was tasked with replacing the expansion tank on a boiler at a commercial building. The tank was leaking, and the building's occupants were complaining of low water pressure. I removed the old tank and replaced it with a new one, ensuring that it was properly sized and installed. I also checked the pressure relief valve and made any necessary adjustments. Finally, I tested the system to ensure that it was working properly.

Just completed an A/C installation in Clinton township Michigan

I am a highly skilled HVAC contractor professional. I recently completed a job where I performed an inspection on a furnace blower motor. The blower motor was not working properly, so I diagnosed the issue and replaced the motor. I also checked the electrical connections and wiring to ensure they were in good condition. After completing the job, I tested the furnace to ensure it was working properly. I am proud of the work I did and the satisfaction of my customers.

I am a skilled professional that works for a McCarver Mechanical Heating & Cooling company. I recently completed a job that involved performing maintenance on a residential air conditioning unit. The job required me to inspect the unit, replace the air filter, clean the condenser coils, and check the refrigerant levels. I also tested the unit's electrical components to ensure they were working properly. After completing the maintenance, I provided the customer with a detailed report of my findings and recommendations for future maintenance.

AC maintenance

I recently completed a job replacing a dual capacitor on a Luxaire AC unit. As a highly skilled and experienced home service professional, I carefully removed the old capacitor from the unit and disconnected the wires from it. Then, I carefully installed the new capacitor and reconnected the wires to it. Finally, I tested the unit to ensure that the capacitor was functioning properly. This job required a high level of skill and expertise, and I am proud to have completed it successfully.

I recently completed a residential ac tune-up on a Lennox unit. The first step in the process was to visually inspect the unit to check for any signs of damage or wear and tear. Next, I cleaned the condenser coil and evaporator coil using a coil cleaner and a brush. I also checked the refrigerant levels and charged the system if necessary. Finally, I tested the operation of the unit and made any necessary adjustments to ensure optimal performance.

I recently completed a residential A/C maintenance job for a customer in the city of Chicago. The customer was very pleased with the work and the results. I performed a thorough inspection of the A/C unit, cleaned and replaced the air filter, and checked all the electrical connections. I also lubricated all the moving parts and made sure the unit was properly calibrated. The customer was very happy with the job and the A/C unit is now running smoothly and efficiently.