Your Best Choice for Furnace, Heat Pump, and AC Repair in Detroit, MI

I am a skilled professional that works for a McCarver Mechanical Heating & Cooling company. I recently completed a job where I performed a tune-up on a water heater. This involved inspecting the unit for any potential issues, cleaning the burner, and replacing any worn-out parts. I also checked the pressure relief valve and thermostat to ensure they were working properly. After completing the tune-up, I tested the unit to make sure it was operating correctly.

Today was a hot one in the attic with a Spacepak high-pressure air handler paired with the Bosch inverter heat pump. Our customer will be able to be comfortable in any weather with this match up.

Today was a hot one. Spacepak paired with a Bosch inverter heat pump. This is an amazing set-up that will keep our customer reliably cool for many years to come.

We replaced a compressor for a customer in Indian Village, Detroit. The compressor was faulty and caused the air conditioner to not work properly. We removed the old compressor and installed a new one, and the customer was happy with the results.

Just finished a dedicated Gas Line for a New Generac Generator Install.

I was called to inspect a split system's thermostat. The system was not cooling properly, and the customer suspected that the thermostat was the issue. I arrived at the customer's home and checked the thermostat. I found that the thermostat was not reading the temperature correctly. I replaced the thermostat and tested it to ensure it was working properly. The customer was happy with the service and thanked me for my help.

I was hired to clean a mini split. I removed the front panel and cleaned the coils and fins. I also cleaned the air filter and evaporator. I used a brush and vacuum to clean the coils and fins. I used a coil cleaner to clean the air filter. I used a vacuum to clean the evaporator. I also checked the refrigerant levels and added more if needed.

I am a highly skilled and experienced home service professional. I recently completed a job replacing a gas union on a water heater. The job required me to disconnect the old gas union, remove the old water heater, and install a new gas union and water heater. I also had to ensure that all connections were properly sealed and tested to meet safety standards. The job was completed on time and to the customer's satisfaction.

Just finished a Mini-Split Installation in (Palmer Woods) Detroit, Michigan.

I was called to a residential home to perform a run up on the air conditioner. The customer had noticed that the air conditioner was not cooling the house properly. I arrived at the house and performed a series of tests to determine the issue. I found that the air filter was dirty and needed to be replaced. I also noticed that the condenser coil was dirty and needed to be cleaned. After cleaning the coil, I recharged the system with refrigerant and tested the air conditioner again. The air conditioner now cooled the house properly. The customer was happy with the service and thanked me for my help.

Just installed a mini split in Detroit Michigan

today, we had a fujitsu install at the new center, one building in Down Town Detroit!

Heat pump repair

Replaced a Existing Mini-Split system with a New Fujitsu Mini-Split

Installing a new high efficiency Fujitsu minisplit sytem

AC maintenance

Completed an installation of a Spakepak in Detroit, Michigan. Paired with a Luxaire condenser, the homeowner will experience peak cool climate throughout the rest of the summer!

Completed an installation of a small duct high-velocity unit, Spacepak, paired with a Luxaire condenser in Detroit, MI. The installation turned out great!

Just finished a generator install in Detroit Michigan

Replacement of Air Conditioning Unit in Grosse Pointe, MI.

Finishing an Daikin Furnace Replacement in Detroit, Michigan.

A/C service

I am a highly skilled HVAC contractor professional. I recently completed a residential AC tune-up for a customer. The tune-up involved inspecting and adjusting the AC system's components to ensure optimal performance and efficiency. I also cleaned the AC unit's coils, checked the refrigerant levels, and tested the system's safety features. The customer was very satisfied with the results and expressed gratitude for my professionalism and expertise.

Just finished installing a high efficiency furnace and air conditioner in the Detroit area

Installed a new high efficiency Luxaire heating and cooling system

We had a Luxaire furnace and air conditioner install today in Detroit! It turned out out awesome! So proud of my guys!

Today we are finishing up a Daikin minisplit install in East English Village with 3 - 7,000 btu wall mounted units and 1 - 15,000 btu wall mounted unit. It's a beautiful day to be in HVAC!

I recently replaced a furnace and air conditioner unit in a home in Detroit, Michigan. The furnace was over 20 years old and had broken down multiple times in the past few months, causing the family great discomfort and inconvenience. The air conditioner was also old and inefficient, causing the family to spend a lot of money on energy bills. By replacing both the furnace and air conditioner with new, high-efficiency models, I was able to provide the family with greater comfort and energy savings, as well as peace of mind knowing that their heating and cooling system would not break down in the middle of the winter or summer.

Finished Duct Sealing on our Rooftop Unit Installation in (Palmer Woods) Detroit, Michigan.

A/C Repair

Completed a furnace and heat pump installation in Palmer Woods, Detroit Area.

Completed a Daikin Fit and Daikin mini-split install today at a beautiful historic home in Palmer Woods!

I recently completed a residential A/C maintenance job for a customer in the city of Chicago. The customer was very pleased with the work and the results. The job involved checking and cleaning the condenser coil, checking and lubing the A/C drive belt, checking and adjusting the refrigerant charge, and checking and cleaning the air filters. I also checked and tested the operation of the A/C system to ensure it was working properly. The customer was very pleased with the results and the efficiency of the A/C system.

Installing a new Bryant package heating and cooling system in Palmer Woods

I’m currently finishing a rooftop installation on a residential property in Palmer Woods (Detroit,Michigan).

I’m currently installing a high efficiency furnace and air conditioner in the Detroit Palmer park area.

I am currently working on a furnace and air conditioning replacement in Detroit, Michigan. The homeowner was experiencing issues with their current system, so we installed a new furnace and air conditioner. The new system is more efficient and will provide better comfort for the homeowner. The job took several days to complete, but the end result is a system that will work reliably for many years to come.

Installation of a Goodman heating and cooling system for a client. This system is a highly efficient and reliable option for homeowners looking for a budget-friendly solution. The system features a gas furnace and an air conditioner, both of which are equipped with advanced technology to ensure optimal performance and energy savings. The installation process involved careful planning and precise execution to ensure that the system was installed correctly and safely. The client was pleased with the results and the system is now operating efficiently, providing them with comfort and peace of mind throughout the year.

As an HVAC contractor technician, I recently completed the installation of a rooftop unit on a residential property. The unit was equipped with custom insulated ductwork to ensure efficient and effective heating and cooling throughout the property. The process involved careful planning, precise measurements, and skilled craftsmanship to ensure a seamless and long-lasting installation. The insulated ductwork was carefully installed and sealed to prevent air leakage, ensuring optimal energy efficiency and comfort for the occupants. The installation process was completed in a safe and efficient manner, meeting the highest standards of quality and workmanship.

A/C repair

A/C repair

Replacing a rooftop package heating and cooling unit

Rooftop replacement

Rooftop replacement

Replacing a rooftop heating and cooling unit

I just completed a water heater service call where the temperature sensor failed. Upon arrival, I checked the water heater and noticed that the temperature sensor was not working properly. I removed the old sensor and installed a new one. After making the necessary adjustments, I tested the water heater and found that the temperature was now working correctly. I also checked the water pressure and found that it was within the normal range. Finally, I gave the customer a maintenance plan for their water heater to keep it running smoothly.

I’m currently finishing a Dunkirk steam boiler project. The project involved replacing the existing boiler with a more efficient model. The new boiler was installed in the same location as the old one and connected to the existing steam distribution system. The project also involved modifying the control system to ensure that the new boiler operates within the required safety parameters. The project was completed on time and within budget.

I recently completed a hydrostatic pressure test on a Cast Iron Sectional Steam Boiler. This essential maintenance procedure involves pressurizing the boiler with water to check its ability to withstand external pressures. It helps ensure that the boiler remains safe and reliable, capable of withstanding the high temperatures and pressures within the system. To perform the test, I first connected the boiler to a water source and filled it to the required pressure. Then, I used specialized equipment to measure the pressure and ensure it remained constant throughout the test. Next, I slowly released the pressure, allowing the water to drain back into the water source. This process took several hours, and I closely monitored the pressure readings to ensure they remained within the specified limits. Finally, I conducted a thorough inspection of the boiler to check for any signs of damage or leaks. I also recorded the test results and documented my observations in a detailed report.